Serial Converters

Sort By:  
Hexin HXSP-485A RS232 to RS485 Converter (HXSP-485A)
HXSP-485 series converter is bi-directional connector converter between RS-232 and RS-485; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.

HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
£7.89
Hexin HXSP-485B RS232 to RS485 Converter (HXSP-485B)
HXSP-485 series converter is bi-directional connector converter between RS-232 and RS-485; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.

HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
£6.31
£7.93
Hexin HXSP-485C RS232 to RS485 Converter (HXSP-485C)
HXSP-485 series converter is bi-directional connector converter between RS-232 and RS-485; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.

HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
£10.27
Hexin HXSP-485D RS232 to RS485 Converter (HXSP-485D)
HXSP-485 series converter is bi-directional connector converter between RS-232 and RS-485; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.

HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
£6.34
Hexin HXSP-422A RS232 to RS422 Converter (HXSP-422A)
HXSP-422 series converter is bi-directional connector converter between RS-232 and RS-422; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.

HXSP-422 series converters change the TXD and RXD signals of RS-232 serial port to 4 wire full duplex RS-422 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-422. The automatically process control make you need not reset and make a easy application of the hardware and software installation.

Standard: Accord EIA RS-232, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-422 side.
Work methods: asynchronous, point to point or multi-point, 4 wire full-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-422 side).
Communication protocol: Transparent.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Signals: RS-232(TXD, RXD,GND); RS-422(TX+,TX-,RX+,RX-,GND).
£9.48
Hexin HXSP-2108C Industrial RS232 to RS422 Converter (HXSP-2108C)
HXSP-2108C is an industrial-grade optical isolation multifunctional converter with external power supply, it compatible with RS-232/RS-485/RS-422 standard. It can change the single-ended RS-232 signal to balanced RS-485/RS-422 signal, The internal optoelectronic isolator and DC Voltage stabilizer can effective lightning suppression , and the ESD offer 600W Surge Protection for each line, it can avoid the lightning strike and prevent interference effectively. RS-232 interface use the DB9 female connector connect with the serial of computer ,on the other side RS-485/RS-422 use the DB9 male connect with 6 terminal board. Since the RS-485 support two wire half duplex, which means the RS-485 only have two lines to receive data and send data. Handshaking signal(RTS Request To Send) usually control the direction of data sending, the inner circuit of HXSP-2108C converter is able to auto sensing the direction of data flow, and switch to ENABLE CONTROLS automatic. A RS-485 network can be built convenient without any handshaking signal; the RS-485 ENABLE CONTROLS is full transparent, no need to modify any software for the old working method based on RS-232.

HXSP-2108C converter comes with external power supply, the characteristic have small in design, long transmission distance, performance stable, etc. it is mainly used for the field of electricity, industrial automatic control, IC card billing system and time attendance, one card solution, access control system, parking system, and so on.

Standard: Accord EIA RS-232, RS-485, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-485/RS-422 side.
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex.
Transmission medium: twisted pair cable or shielded Wire
Baud rate: 300~115000bps.
Signal indication: three signal indication LEDs(TXD,RXD,POWER).
Surge Protection: 600W.
ESD Protection: 15 KV.
Isolation Voltage: 3.5KV Instantaneous, 500V DC continuous
Transmission distance: 0~5KM.
Dimension: 90mm x 65mm x 25.5mm.
£31.34
Hexin HXSP-09F69 RS232 to RS485 RS422 Converter (HXSP-09F69)
Description
HXSP-09F69 series converter is bi-directional connector converter between RS-232 and RS-485 RS-422; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.
HXSP-09F69 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal or 4 wire full duplex RS-422 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.

Specification

Standard: Accord EIA RS-232, RS-485, RS-422 standard
Connector: DB9 female on RS-232 side, DB9 male with 6 pin terminal block on RS-485/RS-422 side
Work methods: asynchronous, point to point or multi-point, 2 wire half-duplex, 4 wire full-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-485 side).
Communication protocol: Transparent
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity
Signals: RS-232 TXD, RXD,GND; RS-485 Date+, Date-,GND; RS-422 T/R+,T/R-,RXD+,RXD-,GND,VCC

£10.27
Per Page      1 - 7 of 7
  • 1