Media Converters
Product Description:
HTB -1100 is 10/100M adaptive fast Ethernet optical transceiver. It can achieve two different twisted-pair cable and optical fiber transmission medium of transformation, relay base - TX 10/100 and 100 base - FX two different network segments, can satisfy the long distance, high speed and high bandwidth fast Ethernet workgroup user needs.
Product Parameters:
Follow the IEEE 802.3, IEEE 802.3u and 100Base-FX standards
Provides a standard RJ45 interface and two SC fiber interface
LED: Power,FDX/Col,FX link/Act,TX Link/Act,Fx 100,TX 100.
Duplex Mode:Full or Half Duplex Mode
Data transfer rate: 10/100Mbps data transfer rate
Power Requirement: AC 100-240V 50/60HZ DC 5V/2A
Ambient Temperature: 0 to 70 degree
Humidity: 5 per cent to 90 per cent
Dimensions:40*100*140mm
Cable:UTP:Cat.5 UTP Cable
Details:
Fiber Type Multimode
Duplex SC fiber optic interface type
Transmission distance 2Km
Min TX PWR:-17.0dBm
Max TX PWR: -8.0dBm
Sensitivity:-31.0dBm
Link Budget:14.0dBm
LED Description:
LED | Colour | Function |
FX 100 | Green | Lit when 100Base-FX operation |
FX Link/ACT | Green | Lit when fiber cable connection with remote device is good. Bliks when any FX traffic is present |
Power | Green | Lit when +5V Power is available |
FDX/Col | Green | Lit when full duplex mode is enabled. Blinking when collision is present |
TX 100 | Green | Lit when 100Base-TX cable operation |
TX Link/ACT | Green | Lit when TP cable connection with remote device is good. Blinks when any traffic is present |
- Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
- UTP port supports MDI/MDI-X auto crossover.
- Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
- Supporting 1552 Byte packet
- Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
- Design of internal or external power supply for selection by users
- Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
- MAC address table: 1K
- Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
- Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
- Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
- LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
- Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.
- Ambient Temperature: 0 ℃ ~70 ℃
- Humidity: 5% ~ 90%
- Dimensions:
- Internal power: 30x110x140mm
- External power: 26x70x93mm
- 1