Special Offers
HXSP-485 series converters change the TXD and RXD signals of RS-232 serial port to 2 wire half duplex RS-485 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-485. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
- Private input RS-232 and RS-485 2 port, 16 output RS-485 port.
- Baud rate 300~115200bps auto adaptation, eliminating the trouble of manually set the baud rate.
- Each RS-485 port has lightning protection and surge protection funcation.
- Each RS-485 port work independently.
- Support two kinds of external power supply.
- More than 5 TD-1216 can be cascaded.
- Each port can be accessed by 32 standard RS-485 devices(nodes).
- Support zero-delay auto-conversion transmit and receive.
- Unique auto-detection circuit.
- Supports hot-swap function, plug and play.
- Able to adapt to the user of any application software.
- can be used as 16 units RS-232 to RS-485 converters.
- Standard: Support EIA RS-485, RS-232C standard.
- Baud rate: 300~115200bps auto adaptation.
- Transmission distance: extend 1200m each on RS-485 side, 5m on RS-232 side.
- Data Flow Control: RS-232 port neednot RTS/CTS hardware flow control, automatic flow control
- Loading device: 32,64,128 nodes.
- Transmission medium: UTP-Unshielded Twisted Pair or RS-485 Wire
- Work methods: asynchronous, point to point, 2 wire half-duplex.
- Isolation Voltage: 3.5KV
- Dimension: 120mm x 85mm x 26mm.
- Environment: -20 ℃ ~ 60 ℃ working temperature, 5%-95% relative humidity.
3D Version pdf file, please download and open it with latest version of Adobe Reader.
3D STEP file:
R4x series is M.2 Key-M 2280 Edge Connector Extension Adapter cable, adapted to PCIe x1, x4, x16, M.2 KeyM / A+E, mPCIe (mini PCIe), U.2 (SFF-8639) connectors to re-locate a PCIe card slot or bridge between slots on two different PCBs. The ribbonized format of the axial cable provides a dense and flexible solution without signal attenuation for high speed PCIe Gen3 8Gbps Data Transaction, bidirectional 16Gpbs (16GT/sec) per PCIe lane.
Cable Flexibility: Highly-routable, foldable, flexible
Thickness=1.4mm (1/16 inch) Width=9mm (3/8 inch)
Cable Length: Standard (015) = 15cm (6inch), Customized for 10~100cm (010~100)
* Contact us for customize:
PCB Quality: Experienced design and durable material for High frequency and low attenuation.
Connector Quality: high quality for PC server / mother board.
Solder Point Protection: PCB-Swaddled and fixed with Bolts and nut to prevent tearing and short circuit for PCB-Cable solder points.
[Specification]
Maximum Speed: PCIe Gen3 8Gbps. Bidirectional 2.0GB/sec (16Gpbs , 16GT/sec) per PCIe lane, PCIe Gen2 (5Gbps) & PCIe Gen1 (2.5Gbps) compatibles.
Header (Male) Connector: M.2 Key-M
Receptacle (Female) Connector: PCIe x1, x4, x16, M.2 KeyM / A+E, mPCIe (mini PCIe), U.2 (SFF-8639)
Cable: Length: Standard (015) = 15cm (6inch), Customized for 1~999cm (001~999)
* Guideline: PCIe Gen3 8Gbps max 24 inch (60cm)
Cable Type: Flat, Twin Axial, Thickness=1.4mm (1/16 inch) Width=9mm (3/8 inch)
Color: Black
Connector Type: Straight (SF), Right angles (SR), Left angled (SL), Dual Edge (SS):
3D Version pdf file, please download and open it with latest version of Adobe Reader.
3D STEP file:
R3x series is PCIe x16 Edge Connector Extension Adapter cable, adapted to PCIe x1, x4, x16, M.2 KeyM / A+E, mPCIe (mini PCIe), U.2 (SFF-8639) connectors to re-locate a PCIe card slot or bridge between slots on two different PCBs. The ribbonized format of the axial cable provides a dense and flexible solution without signal attenuation for high speed PCIe Gen3 8Gbps Data Transaction, bidirectional 16Gpbs (16GT/sec) per PCIe lane.
Cable Quality: Stable PCIe Gen3 8Gbps or higher with high qualityAxial Cable
Cable Flexibility: Highly-routable, foldable, flexible
Thickness=1.4mm (1/16 inch) Width=9mm (3/8 inch)
Cable Length: Standard (015) = 15cm (6inch), Customized for 5~100cm (005~100)
* Contact us for customize:
PCB Quality: Experienced design and durable material for High frequency and low attenuation.
Connector Quality: high quality for PC server / mother board.
Solder Point Protection: PCB-Swaddled and fixed with Bolts and nut to prevent tearing and short circuit for PCB-Cable solder points.
[Specification]
Maximum Speed: PCIe Gen3 8Gbps. Bidirectional 2.0GB/sec (16Gpbs , 16GT/sec) per PCIe lane, PCIe Gen2 (5Gbps) & PCIe Gen1 (2.5Gbps) compatibles.
Header (Male) Connector: PCIe x16
Receptacle (Female) Connector: PCIe x1, x4, x16, M.2 KeyM / A+E, mPCIe (mini PCIe), U.2 (SFF-8639)
Cable: Length: Standard (015) = 15cm (6inch), Customized for 1~999cm (001~999)
* Guideline: PCIe Gen3 8Gbps max 24 inch (60cm)
Cable Type: Flat, Twin Axial, Thickness=1.4mm (1/16 inch) Width=9mm (3/8 inch)
Color: Black
Connector Type: Straight (SF), Right angles (SR), Left angled (SL), Dual Edge (SS):
- 1