Latest Products
Hexin HXSP-422A RS232 to RS422 Converter
$11.95
HXSP-422 series converter is bi-directional connector converter between RS-232 and RS-422; it is mainly used for communication between main controller machines, main controller machine and SCMs or Peripherals, point to point and point to points remote communicate network, it achieve request-response communication between multi-machines, it is mainly used for the field of electricity, industrial automatic control, IC card billing system; such as one card solution, access control system, parking system, and so on.
HXSP-422 series converters change the TXD and RXD signals of RS-232 serial port to 4 wire full duplex RS-422 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-422. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
Standard: Accord EIA RS-232, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-422 side.
Work methods: asynchronous, point to point or multi-point, 4 wire full-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-422 side).
Communication protocol: Transparent.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Signals: RS-232(TXD, RXD,GND); RS-422(TX+,TX-,RX+,RX-,GND).
HXSP-422 series converters change the TXD and RXD signals of RS-232 serial port to 4 wire full duplex RS-422 signal. No need to get through the power, it can get the electricity from the 3rd pin of RS-232 interface , at the same time, there is a request sending by 7th pin(RTS), 4th pin data terminal prepares(DTR) to help power supplying HXSP-422. The automatically process control make you need not reset and make a easy application of the hardware and software installation.
Standard: Accord EIA RS-232, RS-422 standard.
Connector: DB9 female on RS-232 side, DB9 male with 6 terminal block on RS-422 side.
Work methods: asynchronous, point to point or multi-point, 4 wire full-duplex.
Transmission medium: Ordinary Line , twisted pair cable or Shielded Wire
Baud rate: 300~115000bps.
Transmission distance: 5 meters (RS-232 side) and 1200 meters (RS-422 side).
Communication protocol: Transparent.
Environment: -10 to 85 centigrade working temperature, 5% to 95% relative humidity.
Signals: RS-232(TXD, RXD,GND); RS-422(TX+,TX-,RX+,RX-,GND).
- Availability: In Stock
- Model: HXSP-422A